PRESS RELEASES

SMART SPLICE LINE TERMINATOR™

4/1/2013 - Block Rear A/C Lines with New 8mm, 15mm and Combination SAE/Metric Line Terminator Assortment Kits from AirSept Automotive service providers can now help those customers that don’t want to spend hundreds of dollars to repair their failed rear air conditioning unit. AirSept’s Line Terminator kits allow shops to block off the line where it splits to go to the rear evaporator. The repair takes no more than five minutes and can be done without removing the line. Technicians can
DOC AirSept Line Terminator Now In Metric Sizes PR.pdf

SMART SPLICE ™ LINE-TO-HOSE CONNECTOR

3/1/2013 - Smart Splice Tube-to-Hose Connector – Fast, Permanent Repair Atlanta, GA (September 2013) – Avoid the costly, time-consuming replacement of the connections between a metal line and A/C Reduced Barrier Hose. The new Smart Splice™ Tube-to-Hose Connector from AirSept offers a permanent repair with only five-minute installation and no waiting for special-order OE lines. Repairs can be made often without line removal, saving labor time and increasing job profitability. The Smart Splice Tube-to-Hose Connector is based on proven, advanced seal and vibration resistant technologies that make it superior to traditional compression fittings.
DOC Smart Splice Tube-to-Hose Connector PR.pdf

SMART SPLICE HOSE-TO-HOSE CONNECTOR™

5/1/2014 - Smart Splice Hose-to-Hose Connector – Superior Leak Resistance Avoid the bulky, expensive powered crimping systems typically used to build hose connections. The new Smart Splice™ Hose-to-Hose Connector from AirSept offers a permanent repair using a crimp-and-frame system that offers field-proven reliability. The crimp-and-frame system is a threadless hose fitting technology that eliminates the problems of damaged threads and over-torqueing of the fitting. Precision-designed advanced crimp technology aligns and holds the hose and clamps in the proper position for ease of installation.
DOC Smart Splice Hose-to-Hose Connector PR.pdf

SMART SPLICE ULTIMATE SYSTEM™

9/1/2013 - Smart Splice™ Ultimate Kit – Superior Line Repair Sealing Technology in Straight, 45°, and 90° Fittings, and SAE / Metric Sizes Everything you need to build or repair metal lines and rubber hose, connect tubing to rubber hose, block-off a line, and add an A/C service port is included in the Smart Splice™ Ultimate Kit from AirSept. The Ultimate Kit includes all of the tools and fittings a technician uses for every type of line or tubing repair. It is all made possible by AirSept’s innovative Line Splice technology. The Line
DOC Smart Splice Ultimate Kit PR.pdf

DUAL AUTOMATIC RECYCLE GUARD™

2/1/2013 - New! Fully-Automatic Recycle Guard Protects A/C Service Equipment from Debris, Sealant and Other Contaminants! The Recycle Guard Sealant, Dye, and Lubricant Separator from AirSept is now available in an easy-to-use, fully-automatic, dual (High & Low Side) version. The new Dual Automatic Recycle Guard (DARG) works during both the recover and recharge operation with no technician supervising when your machine switches. It automatically adjusts flow direction when service equipment switches from recover to recharge.
DOC New Fully Automatic Recycle Guard PR.pdf

GM TRUCK CABIN AIR FILTER

3/1/2014 - The Airsept segmented cabin air filter was named the most service-friendly new product. Airsept has created a cabin air filter that bends like an overhead garage door as it’s installed. Bending allows insertion without damaging the filter. This cabin air filter was designed for GM full-size pickup trucks and SUVs built from 2001 to 2012 without factory- installed cabin air filters. http://www.motor.com/article.asp?article_ID=2167
DOC magcov_0314.jpg
11/1/2013 - Segmented Cabin Air Filter Bends for Easy Installation – Fits All 2001-2012 GM Full-Size Pickups and SUVs Hundreds of thousands of GM full-size pickup trucks and SUVs were built from 2001 to 2012 without factory-installed cabin air filters. GM designed a space for a cabin air filter, but left it empty. Part of the reason is that filter access is partially blocked by the slope of the floor where it angles to accommodate the top of the transmission. This makes it difficult to install traditional rigid cabin air filters in these GM trucks.
DOC Cabin Air Filter for GM Trucks PR.pdf

SEE BRIGHTER™

2/1/2013 - See Brighter™ Non-Abrasive Headlight Restoration Kit - New from AirSept AirSept’s new See Brighter™ Non-Abrasive Headlight Restoration Kit significantly increases a cloudy headlight’s ability to project light – without labor-intensive sanding and polishing. The plastic covers of many headlights can become cloudy over time, reducing the amount of light projected. Owners of vehicles with dull, discolored headlights appreciate headlight restoration as an inexpensive alternative to costly headlight replacement and a great way to improve night vision and driving safety. See Brighter restores polycarbonate
DOC See Brighter Headlight Restoration Kit PR.pdf

COMPRESSOR GUARD™ PLATES

10/1/2013 - New Compressor Guard Filter Plates Protect Scroll Compressors from Debris – for Honda, Ford, GM, Mazda, other Scroll Applications Scroll compressors tend to leave more debris in the A/C system when they fail. This is a major reason compressors come back even when you install a quality brand. Even flushing cannot guarantee 100% removal of these metallic Trojan horses. Compressor Guard Suction Filter Plates prevent leftover debris from entering the new compressor and causing performance problems and customer dissatisfaction.
DOC Compressor Guard Filter Plates for Scroll Compressors PR.pdf
9/1/2013 - Compressor Guard A/C Filter Plates now in EPICOR EPartExpert online catalog Compressor Guard A/C Filter Plates for over 7,000 Applications by YMM AirSept Compressor Guard A/C Filter Plates are now available in the online EPartExpert catalog from Epicor. When a compressor fails, unless you replace every A/C component, debris often remains in nooks and crannies in the system, waiting to be drawn into your compressor installation at startup. This is a major reason replacement compressors fail at a much higher rate than factory installations. Compressor Guard
DOC Compressor Guard Filter Plates Now in EPICOR ePartExpert Online PR.pdf
7/1/2013 - New OE-Fit Compressor Guard Filter Plates – for Audi, BMW, Mercedes, Mitsubishi, Toyota, VW and Other Applications A/C system components leave debris in the lines when they fail. Compressors spit out metallic shavings, accumulators drop desiccant pieces, seals break off bits of hardened rubber, and the list goes on. Compressor Guard Suction Filter Plates prevent leftover debris from entering the new compressor and causing performance problems and customer dissatisfaction.
DOC New Compressor Guard Filter Plates Protect Audi, BMW, Mercedes Compressors PR.pdf
7/1/2013 - Seven New OE-Fit Compressor Guard Filter Plates – for Denso, Sanden, GM/Saturn, Mitsubishi and Other Applications A/C system components leave debris in the lines when they fail. Compressors spit out metallic shavings, accumulators drop desiccant pieces, seals break off bits of hardened rubber, and the list goes on. Compressor Guard Suction Filter Plates prevent leftover debris from entering the new compressor and causing performance problems and customer dissatisfaction. Compressor Guard Suction Filter Plates are application-specific, OE-fit design for simplified installation. Suction filter plates install in under five minutes with no line cutting. Seven new
DOC Seven New Compressor Guard Filter Plates Protect Compressors PR.pdf

SMART SPLICE LINE SPLICE™ Straight - 45 and 90 degree fittings

10/1/2013 - Airsept’s Smart Splice™, Recycle Guard™, and Compressor Guard™ Now Available through Grainger Popular AirSept® products in the Smart Splice™, Compressor Guard™, Recycle Guard™, PermaTube, A/C Charge Guard™, and A/C service tool product lines are now available through Grainger.
DOC AirSept Products Now Available through Grainger PR.pdf
5/1/2013 - Line Splice Now in 3/4”, 7/8”, 15mm, and 16mm Sizes Rub-through damage, pinhole leaks, and cross-threaded joints are no problem for AirSept’s Line Splice. Repair a damaged metal line in five minutes without removing the entire line. New 3/4”, 7/8”, 15mm, and 16mm sizes allow technicians to repair damaged A/C Low Side and other large metal lines. The Line Splice is also available in sizes to fit 5/16”, 3/8”, 1/2”, 5/8”, 8mm, 10mm, and 12mm (O.D.) lines.
DOC AirSept Line Splice™ New Large Sizes PR.pdf

HOSE CUTTER

10/1/2013 - New Hose and Tube Repair Tools from AirSept The new AirSept® Hose and Tube Repair Tools put building or repairing automotive hoses within reach of every technician and shop budget. Build hoses and repair connections quickly and easily without large, expensive crimpers and dies, and with no complicated measuring steps. The new Hose Cutter, hand-held Crimper, Tube Cutter, and metal De-burring Tool from AirSept help make it easy.
DOC New AirSept Line Repair Tools PR.pdf

A/C BLEND DOOR REPAIR KIT

2/1/2014 - Repair A/C Blend Doors without HVAC Case Removal AirSept’s new A/C Blend Door Repair Tool allows repair of stuck blend doors without removing the door from the HVAC unit, and without cutting the case. Repair takes 2 hours, only one-fourth the minimum eight hour job if the HVAC unit must be removed.
DOC AirSept AC Blend Door Repair Tool PR.pdf

COOLING COIL COATING™

10/1/2004 - Cooling Coil Coating from AirSept is the factory-recommended air conditioner odor solution for many franchised vehicle dealerships. The following manufacturers Technical Service Bulletins recommend Cooling Coil Coating as thepreferred solution to combat foul A/C odor problems.
DOC cccoempr100704.doc
10/1/1999 - AirSept, Inc. provides an effective solution to unpleasant odors that can occur when drivers turn on their car air conditioner. The AirSept® Cooling Coil CoatingTM application process removes odor-causing moisture and contaminants from the A/C evaporator, then applies a unique coating that protects for up to a year against new moisture build-up .
DOC cccpr3.doc

A/C ODOR SHIELD™

9/1/2005 - AirSept’s new AC Odor Shield Starter Kit features the one-two punch of CleanEvap and AC Odor Shield. The kit also includes Ulti-Flex Pressure Spray Tool.
DOC ACOSCEstaterPR_082405.doc
3/1/2005 - Vehicle owners now have a long-term solution for a/c odor. AirSept's AC Odor Shield coats the evaporator surface, providing protection against a/c odor for up to one year.
DOC acodorshieldconsume04Mar05.doc
9/1/2004 - AirSept now offers the A/C Odor Shield Combo Kit that contains both the new AirSept Evaporator Cleaner and A/C Odor Shield.
DOC odorshieldcombokit102104.doc

HEAVY DUTY REFRIGERANT OIL/DYE INJECTOR

10/1/2013 - New Professional Grade, Heavy Duty AirSept A/C Oil Injector AirSept’s new Heavy Duty A/C Oil Injector offers professional grade design that gives not only accuracy and ease of use, but also the long service life that technicians demand of an everyday shop tool.
DOC AirSept Heavy Duty AC Oil Injector PR.pdf

CLICK LOCK™

1/2/2013 - CLICK LOCK A/C SECURITY SYSTEM from AirSept Click Lock is a unique new tool that alerts service providers if an air conditioning system has been opened since the last time the repair shop serviced the system. The Click Lock A/C Security System features a patented, snap-together locking cap that fits over any standard High or Low Side service fitting on domestic and import vehicles.
DOC AirSept Click Lock Alerts You to AC System Tampering PR.pdf

FREELOCK™

10/1/2013 - FreeLock™ Door Lock Actuator Removal Tool from AirSept, Inc. AirSept’s new FreeLock™ Door Lock Actuator Removal Tool allows technicians to remove and replace the door lock actuator in many Ford trucks, vans, SUVs, and passenger cars in a half of an hour or less.
DOC System.Web.HttpPostedFileWrapper

REFRIGERANT CANISTER FILTER™

10/1/2013 - Prevent A/C Service Equipment Downtime with Airsept’s New Refrigerant Canister Filter™
DOC AirSept Refrigerant Canister Filter PR.pdf
Right Column

AHR Expo

Jan 22 - 24, 2018
Chicago, IL
booth 6395

View More

Automechanika

July 26-28, 2017
Chicago, IL
booth 1551

View More